Y Splice Junction Bars

Patton & Cooke Co.'s Y Splice Junction Bar reduces space requirements for multiple cable connections in 3 phase configurations. Our junction bars provide rigid connection points to eliminate multiple flexible cable interconnections. Available in a wide variety of configurations up to 35 kV.

Printable Spec Sheet

SELECTION REMINDERS:

Standard ratings for:
15 /25/35 kV
L & Y Splice:
Voltage: to 25 kV,
Impulse Voltage: to 125 kV BIL
Corona Extinction: to 19 kV
Standard ratings for 35 kV Y Splice:
Voltage: 35 kV
Impulse Voltage: 150 kV BIL
Corona Extinction: 26 kV
The standard splice is equipped with protective covers and a mounting bracket
Many combinations of 200/600/900 Amp junction bars are available

ORDERING PROCEDURE:

Determine the following:
- Maximum voltage, kV.
- Current Rating, Amp.
- Number of positions required for installation.
- Configuration of splice
Select single casting 3 phase device or 3 x 1 single phase devices on common frame
Select catalog number of splice
Provide the maximum voltage, kV and substitute its corresponding extinction value for x in the catalog number.

Example 1:
25 kV (corona extinction = 19 kV), 3-200 Amp universal bushing wells required straight inline and
6-600 A standard bushings required at 90 deg. with single casting
Catalog Number JBY-3A/6B-19

Example 2:
Same as abovebut with 3x1 single phase
Catalog Number JBY3-1A/2B-19