|
|
600 / 1100 Volt Cable Couplers
 600
/ 1100 V Full Brochure
We had our customers in mind when we designed our 600/1100 Volt
twist lock style coupler. Our C10 Series couplers are designed to
mate with competitors products without any field modifications.
This allows the upgrade to Patton & Cooke quality, without the
conversion cost normally associated with a full scale replacement
program.
Read More > |
C10 Series Couplers:
Features & Benefits
With full compatibility, you can integrate to realize the savings
Just check out our exclusive features and you'll agree that this
coupler has truly been designed with the customer in mind.
Design Standard:
The C10 Series coupler is designed to meet or exceed the specifications
of CSA 22.2 No. 182 / UL 1682
< Hide |
Printable Spec Sheet
SELECTION REMINDERS:
1. An entrance fitting kit must be purchased for each cable mount coupler.
2. Couplers are anodized and epoxy coated white.
3. Equipment mount couplers are available in two mounting styles (145, 160 and 225 A only).
4. Maximum conductor size refers to the physical size of the stem bore; it is not related to the cable ampacity.
ORDERING PROCEDURE:
1. Determine the following:
a. Maximum current required
b. Maximum conductor size
c. Male plug or female receptacle contacts
d. Cable or equipment mounting
2. Select catalog number of coupler
3. If cable mounting provide outside cable diameter to determine entrance fitting kit catalog number.
Example:
225 Amp, #4/0 cable, male plug, cable mount
Coupler Cat No: C10C1005
Entrance Fitting Kit Cat No: C10C3019-M
|
Printable Spec Sheet
SELECTION REMINDERS:
1. An entrance fitting kit must be purchased for each cable mount coupler.
2. Couplers are anodized and epoxy coated white.
3. Equipment mount couplers are available in two mounting styles (145, 160 and 225 A only).
4. Maximum conductor size refers to the physical size of the stem bore; it is not related to the cable ampacity.
ORDERING PROCEDURE:
1. Determine the following:
a. Maximum current required
b. Maximum conductor size
c. Male plug or female receptacle contacts
d. Cable or equipment mounting
2. Select catalog number of coupler
3. If cable mounting provide outside cable diameter to determine entrance fitting kit catalog number.
Example:
225 Amp, #4/0 cable, male plug, cable mount
Coupler Cat No: C10C1005
Entrance Fitting Kit Cat No: C10C3019-M
|
Printable Spec Sheet
SELECTION REMINDERS:
1. An entrance fitting kit must be purchased for each cable mount coupler.
2. Couplers are anodized and epoxy coated white.
3. Equipment mount couplers are available in two mounting styles (145, 160 and 225 A only).
4. Maximum conductor size refers to the physical size of the stem bore; it is not related to the cable ampacity.
ORDERING PROCEDURE:
1. Determine the following:
a. Maximum current required
b. Maximum conductor size
c. Male plug or female receptacle contacts
d. Cable or equipment mounting
2. Select catalog number of coupler
3. If cable mounting provide outside cable diameter to determine entrance fitting kit catalog number.
Example:
225 Amp, #4/0 cable, male plug, cable mount
Coupler Cat No: C10C1005
Entrance Fitting Kit Cat No: C10C3019-M
|
Printable Spec Sheet
SELECTION REMINDERS:
1. An entrance fitting kit must be purchased for each cable mount coupler.
2. Couplers are anodized and epoxy coated white.
3. Equipment mount couplers are available in two mounting styles (145, 160 and 225 A only).
4. Maximum conductor size refers to the physical size of the stem bore; it is not related to the cable ampacity.
ORDERING PROCEDURE:
1. Determine the following:
a. Maximum current required
b. Maximum conductor size
c. Male plug or female receptacle contacts
d. Cable or equipment mounting
2. Select catalog number of coupler
3. If cable mounting provide outside cable diameter to determine entrance fitting kit catalog number.
Example:
225 Amp, #4/0 cable, male plug, cable mount
Coupler Cat No: C10C1005
Entrance Fitting Kit Cat No: C10C3019-M
|
Printable Spec Sheet
SELECTION REMINDERS:
1. An entrance fitting kit must be purchased for each cable mount coupler.
2. Couplers are anodized and epoxy coated white.
3. Equipment mount couplers are available in two mounting styles (145, 160 and 225 A only).
4. Maximum conductor size refers to the physical size of the stem bore; it is not related to the cable ampacity.
ORDERING PROCEDURE:
1. Determine the following:
a. Maximum current required
b. Maximum conductor size
c. Male plug or female receptacle contacts
d. Cable or equipment mounting
2. Select catalog number of coupler
3. If cable mounting provide outside cable diameter to determine entrance fitting kit catalog number.
Example:
225 Amp, #4/0 cable, male plug, cable mount
Coupler Cat No: C10C1005
Entrance Fitting Kit Cat No: C10C3019-M
|
Printable
Spec Sheet
AVAILABLE OPTIONS:
ENTRANCE FITTING KITS FOR C10 SERIES
COUPLERS:
EPOXY POWDER COATING COLORS:
The addition of polyester powder coating
will provide additional corrosion resistance to cable
couplers. Patton & Cooke couplers are cast with an
aluminum that has been alloyed for strength and resistance
to corrosion. In addition to corrosion resistance, powder
coating can enhance safety by helping ensure couplers
remain visible. Powder coating can also provide a helpful
visual reference for determining the gender of a coupler
in the field: ensuring that cables are layed out in the
correct orientation for plug-receptacle systems.
Choose color from chart below or contact
factory to request custom color
JUNCTION BOX:
Why Use Junction Boxes:
Incorporating a plug to plug cable arrangement is the
major advantage that can be gained with a junction box.
For larger cables in particular, it can take considerable
time and energy to add or remove a length of cable from
a mining production environment. With a plug to plug
arrangement, the cable can be laid out in either direction
as the connector is the same on both ends. Traditional
jumper cable arrangements are plug to receptacle, like
common household extension cords, and so it is possible
to lay out a cable "incorrectly" with this
arrangement.
click
here for more information on junction boxes
SPLITTER BOX:
Why Use Splitter Boxes:
Splitter boxes are the ideal solution for
reducing cable requirements in production areas. Splitter
boxes enable 2 or more pieces of equipment to draw power
from 1 cable feed. Splitter boxes have a wide range of
options including indicator lights and ground wire monitoring.
If equipped with optional live end covers, it is possible
to energize the splitter box with one or more unused outlets.
click
here for more information on splitter boxes
SKIDS
Why Use Skids:
The use of skids with couplers can help
to dramatically extend the life of cable and couplers
by keeping them off the ground, and increasing their visibility
to personnel and mobile equipment. For personnel, increased
visibility means a safer work environment; and for equipment,
it means less downtime.
Patton & Cooke couplers are designed
to ensure a long working life if they are left on the
ground, however skid mounting couplers will provide added
protection for the cable and couplers. And as the real
cost of coupler ownership includes installation, maintenance,
and materials, extending the life of couplers will help
to reduce these costs as well.
Extending the life of couplers means less
maintenance and more machine uptime!
click
here for more information on skids
COUPLING / DECOUPLING TOOLS AND
COVERS:
Universal Coupling Decoupling Wrench
Covers for C10 Series couplers are not included in the
coupler assembly and must be purchased separately.
|
|
|
|
For more information on this product email 
