Patton & Cooke
Zoom

Strain Relief Clamp

Strain Relief Entrance Fitting

PDFBrochure

Postitive, Waterproof Seals - The Strain Relief Entrance Fitting combines a water tight seal with a positive clamping action around the cable. It is ideal for permanent entry of a cable into a mine power center, switchgear, disconnect switch or a standard terminating box. These fittings are available in 4 sizes which cover cable outside diameters from 0.82 to 3.5" or 21-89mm. 

Read More >

Printable Spec Sheet

 

SELECTION REMINDERS:

  1. Each kit consists of 2 clamp inserts and 1 cable gasket.
  2. Choose the kit to fit the outside diameter of the cable.
  3. Make sure that the diameter of the kit chosen falls within the outside cable diameter range of the selected strain relief entrance fitting.

 

ORDERING PROCEDURE:  

  1. Determine the outside cable diameter.
  2. Select the catalog number of the strain relief entrance fitting.
  3. Clamp inserts and cable gaskets must be purchased as a kit for the entrance fitting.

Example:

Cable diameter 2.25"
Strain Relief Ent Fitting C150F3030
Ent Fitting Gasket Kit C150F3017

 

 

emailFor more information on this product email contact@pattonandcooke.com