Cable Transition Modules

Patton & Cooke Co.'s CTM's are designed for splicing PILC into solid dielectric cable. P&C modules allow easy and reliable construction of single phase taps or splices from PILC distribution cable feeders using Separable insulated Connectors (i.e. Rubber Elbows). CTM's are rated for 15, 35, or 35 kV applications and are available in 200, 600 or 900 Amp configurations.

Cast from P&C's exclusive thermal setting resin, our CTM's possess the same properties as our junction bars. P&C CTM's are a unique integration of a PILC splice and a junction bar& in one device.

Cable Transition Module Catalog Numbers

Application: Paper Insulated Lead Covered Cable (PILC) Run to Solid Dielectric Tap

Illustration (not to scale)	Description	P & C Cat No	Dimensions						Weight
			Length		Width		Height
			mm	in	mm	in	mm	in	kg	lb
	15 or 25 kV Straight  thru trans 3 Point 200 Amp Dielectric Tap	CTM-005A	216	8.50	406	9.67	216	8.50	8	18
	15 or 25 kV Straight thru trans 3 Point 600 Amp Dielectric Tap	CTM-012A	235	9.25	318	12.50	235	9.25	9	20
	15 or 25 kV Tap trans 3 Point  200 Amp Dielectric Tap	CTM-015A	356	14.00	260	10.25	254	10.00	15	33
	15 or 25 kV Tap trans 6 Point  200 Amp Dielectric Tap	CTM-025A	356	14.00	375	4.75	251	9.88	28	62
	15 or 25 kV Tap trans 3 Point  600 Amp Dielectric Tap	CTM-011A	356	14.00	260	10.25	356	14.00	16	36
	15 or 25 kV Tap trans 6 Point  600 Amp Dielectric Tap	CTM-020A	356	14.00	375	14.75	356	14.00	31	68
	15 or 25 kV Run & Tap trans 3 Point  200 Amp Dielectric Tap, 3 Point  600 Amp  PILC Tap	CTM-010A	356	14.00	406	16.00	251	9.88	17	37
	15 or 25 kV Run & Tap trans 6 Point  200 Amp Dielectric Tap, 6 Point  600 Amp  PILC Tap	CTM-024A	356	14.00	521	20.50	251	9.88	30	66
	15 or 25 kV Run & Tap  trans 3 Point  600 Amp Dielectric Tap, 3 Point  600 Amp  PILC Tap	CTM-009A	356	14.00	406	16.00	356	14.00	18	40
	15 or 25 kV Run & Tap  trans 6 Point  600 Amp Dielectric Tap, 6 Point  600 Amp  PILC Tap	CTM-019A	356	14.00	521	20.50	356	14.00	33	72
	35 kV Tap trans 3 Point  600 Amp Dielectric Tap	CTM-033A	400	15.75	438	17.25	413	16.25	38	84
	35 kV Tap trans 6 Point  600 Amp Dielectric Tap	CTM-034A	400	15.75	578	22.75	413	16.25	69	152

Application: Paper Insulated Lead Cable (PILC) Run to Solid Dielectric Taps

Illustration (not to scale)	Description	P & C Cat No	Dimensions						Weight
			Length		Width		Height
			mm	in	mm	in	mm	in	kg	lb
	15 or 25 kV Straight thru 3 Point  200 Amp Dielectric Tap, 3 Point  600 Amp PILC Tap	CTM-029A	356	14.00	362	14.25	254	10.00	18	40
	15 or 25 kV Straight thru 3 Point 600 Amp Dielectric Tap, 3 Point 600 Amp PILC Tap	CTM-030A	356	14.00	362	14.25	356	14.00	21	46

 

ACCESSORIES:
	Mounting brackets Wiping sleeves Wiping Flanges
SELECTION REMINDERS:
1.	Standard ratings for 15 or 25 kV	4.	All cable transition modules are
	modules:  Impulse Voltage: 95 or 125k BIL Corona Extinction: 11 or 19 kV		for use with molded separable insulated connectors.
	Standard ratings for 35	5.	Standard modules are for horizon-
	kV modules:		tal mounting. For unique transition
	Impulse Voltage: 150 kV BIL		splicing requirements contact
	Corona Extinction: 26 kV		factory.
2.	All cable transition modules are	6.	For 900 Amp applications,
	standard equipped with solder		contact factory.
	lugs and protective covers.
		7.	Weights and dimensions
3.	Wiping sleeves and mounting		are approximate.
	brackets are sold separately.
ORDERING PROCEDURE:
1.	Determine the following:	4.	Specify if mounting brackets or
a.	Maximum voltage, kV.		wiping sleeves are required.
b.	Current Rating of tap(s), Amp
c.	Transition configuration		Example:
			15kV, 600 Amp run with 3 point,
2.	Select catalog number of cable		200 Amp tap, run & tap
	transition module.		transition configuration
3.	Provide the conductor size and		CTM Catalog Number   CTM-011A
	type of cable.