high voltage cable couplers, mining coupler, cable accessories, junction bars, trailing cable coupler, design and manufacturing, ship to shore power, cold ironing, trolley shoes, substation, cable bracket, bus support, capnut termination, cable transitions, ground fault protection, PILC Cable, aircraft warning marker, oil stop module, utility products, patton, cooke

mining products utility products transportation products tunnel boring machines & shore power Patton & Cooke Company
home
products
brochures
case studies
multimedia
contact us
mining > products > cable accessories > straine relief entrance fitting


     Strain Relief Entrance Fitting
strain relief entrance fitting

Postitive, Waterproof Seals

The Strain Relief Entrance Fitting combines a water tight seal with a positive clamping action around the cable. It is ideal for permanent entry of a cable into a mine power center, switchgear, disconnect switch or a standard terminating box. These fittings are available in 4 sizes which cover cable outside diameters from 0.82 to 3.5" or 21-89mm.

Strain Relief Entrance Fitting Catalog Numbers
Cable Diameter P & C
Cat No
mm in
21-47 0.82-1.87 C150F3029
48-60 1.88-2.37 C150F3030
61-69 2.38-2.75 C150F3031
70-89 2.76-3.50 C150F3032
 
 

Entrance Fitting Gasket Kit Catalog Numbers

Cable Diameter

P & C
Cat No

 

Cable Diameter

P & C
Cat No

mm

in

mm

in

20.8-22.1

0.82-0.87

C150F3004

51.1-53.8

2.01-2.12

C150F3016

22.4-23.9

0.88-0.94

C150F3005

54.1-57.2

2.13-2.25

C150F3017

24.1-25.7

0.95-1.01

C150F3006

57.4-60.2

2.26-2.37

C150F3018

25.9-26.9

1.02-1.06

C150F3007

60.5-63.5

2.38-2.50

C150F3019

27.2-28.4

1.07-1.12

C150F3008

63.8-66.5

2.51-2.62

C150F3020

28.7-31.8

1.13-1.25

C150F3009

66.8-69.9

2.63-2.75

C150F3021

32.0-34.8

1.26-1.37

C150F3010

70.1-72.9

2.76-2.87

C150F3022

35.0-38.1

1.38-1.50

C150F3011

73.2-76.2

2.88-3.00

C150F3023

38.4-41.1

1.51-1.62

C150F3012

76.5-79.2

3.01-3.12

C150F3024

41.4-44.5

1.63-1.75

C150F3013

79.5-82.6

3.13-3.25

C150F3025

44.7-47.5

1.76-1.87

C150F3014

82.8-85.6

3.26-3.37

C150F3026

47.8-50.8

1.88-2.00

C150F3015

85.9-88.9

3.38-3.50

C150F3027
     
     
SELECTION REMINDERS:    
1. Each kit consists of 2 clamp inserts and 1 cable gasket.
 3. Make sure that the diameter of the kit chosen falls within the outside cable diameter range of
2. Choose the kit to fit the outside diameter of the cable. the selected strain relief entrance fitting.
 
ORDERING PROCEDURE:
1. Determine the outside cable diameter.
 Example:
    Cable diameter 2.25"
2. Select the catalog number of the strain relief entrance fitting.
 Strain Relief Ent Fitting      C150F3030
3. Clamp inserts and cable gaskets must be purchased as a kit for the entrance fitting. Ent Fitting Gasket Kit        C150F3017

 

 

Patton & Cooke Company 2007