The Patton & Cooke strain relief entrance fitting is
ideally suited for installations where trailing cable couplers
are not being used but where cables may be installed and moved
frequently. The split design means that the entrance fitting can
be installed or removed without disturbing the stress cones, sleeves
or taping which makes up the cable termination for quick and easy
installation and removal without any tools! Available in 6 sizes
which cover cable outside diameters from 2.76-3.50 inches (70-89mm)
diameters 0.625"-3.625"(16-92mm). Larger sizes available on request.
| Cable
Diameter |
P
& C
Cat No |
| mm |
in |
| 70-72 |
2.76-2.87 |
11W-040-D-U |
| 73-76 |
2.88-3.00 |
11W-040-D-V |
| 77-79 |
3.01-3.12 |
11W-040-D-W |
| 80-82 |
3.13-3.25 |
11W-040-D-X |
| 83-85 |
3.26-3.37 |
11W-040-D-Y |
| 86-89 |
3.38-3.50 |
11W-040-D-Z |
|
| Ordering Procedure: |
|
Example: |
| |
|
|
| 1. Determine the cable |
|
Cable Diameter: 2.75" |
| outside diameter |
|
Split Strain Relief Cat No. |
| |
|
11W-040-D-Z |
| 2. Select catalog
number |
|
|
